How to Craft Your Own Pussy Pocket- A Step-by-Step Guide to DIY Fashion

How to Make Homemade Pussy Pocket

Are you looking to add a unique touch to your wardrobe or create a fun accessory for a costume? Look no further! Making your own Pussy Pocket is a simple and rewarding project that can be completed in just a few steps. Whether you’re a beginner or an experienced sewer, this guide will walk you through the process of creating a stylish and practical Pussy Pocket.

Materials Needed

Before you start, gather the following materials:

– Fabric: Choose a fabric that suits your style and the occasion. For a more realistic look, consider using a fabric with a texture similar to leather.
– Pencil
– Scissors
– Sewing machine or needle and thread
– Measuring tape
– Zipper: The length of the zipper should be slightly longer than the width of the Pussy Pocket.
– Sewing pins
– Iron and ironing board

Step 1: Measure and Cut the Fabric

Using the measuring tape, determine the size of your Pussy Pocket. A standard size is approximately 6 inches wide and 4 inches tall. Measure and mark the dimensions on your fabric with a pencil. Cut out the fabric according to the marked dimensions, ensuring you have two identical pieces.

Step 2: Create the Zipper Opening

On one of the fabric pieces, measure and mark the position for the zipper opening. The opening should be centered horizontally and slightly lower than the top edge. Using a pair of scissors, cut a straight line from the marked point to the bottom edge of the fabric. This will create the opening for the zipper.

Step 3: Attach the Zipper

Place the zipper face down on the right side of the fabric with the opening facing up. Pin the zipper in place, ensuring it is centered. Using a sewing machine or a needle and thread, sew the zipper to the fabric, starting from the bottom edge and going up to the marked point. Backstitch at the beginning and end of the seam to secure it.

Step 4: Sew the Fabric Pieces Together

Place the two fabric pieces right sides together. Pin them in place, ensuring the zipper opening is aligned. Sew around the edges, leaving a small gap for turning the Pussy Pocket right side out. Trim any excess threads and clip the corners for a smoother finish.

Step 5: Turn the Pussy Pocket Right Side Out

Using a pair of scissors or a pointy object, push the corners out to create a rounded shape. Turn the Pussy Pocket right side out through the opening you left in the seam. Iron the edges to flatten them and create a crisp finish.

Step 6: Close the Opening and Add Finishing Touches

Fold the opening inwards and pin it in place. Sew the opening shut, ensuring a strong and secure seam. You can also add a decorative button or a loop for hanging the Pussy Pocket, if desired.

Congratulations! You’ve successfully made your very own Homemade Pussy Pocket. Now go ahead and showcase your creativity by wearing it as a statement piece or using it as a practical accessory. Happy sewing!